Technical Terms of Reciprocating Air CompressorsPoints : Technical Terms of Reciprocating Air Compressors, Inlet Pressure, Discharge Pressure, Compressor ratio (or pressure ratio), Compressor Capacity, Free Air Delivery, Swept volume, Mean Effective PressureThe following technical terms, which will be frequently used in this site, should be
clearly understood at this stage:1. Inlet PressureIt is the absolute pressure of air at the inlet of a compressor.2. Discharge PressureIt is the absolute pressure of air at the outlet of a compressor.3. Compressor ratio (or pressure ratio)It is the ratio of discharge pressure to the inlet pressure. Since the discharge pressure
is always more than the inlet pressure, therefore the value of compression ratio is
more than unity.4. Compressor CapacityIt is the volume of air delivered by the compressor, and is expressed in
m^{3}/minor m^{3}/sec.5. Free Air DeliveryIt is the actual volume delivered by a compressor when reduced to the normal
temperature and pressure condition. The capacity of a compressor is generally given in
terms of free delivery.6. Swept volumeIt is the volume of the air sucked by the compressor during its suction stroke:
Mathematically, the swept volume or displacement of a single acting air compressor is
equal to fR2l (Where “R” is the radius of cylinder bore and “1” the piston stroke).7. Mean Effective PressureAs a matter of fact, air pressure on the compressor piston keeps on changing with the
movement of piston in the cylinder. The mean effective pressure of the compressor is
found out mathematically by dividing the work done per cycle with the stroke volume.

## No comments:

## Post a Comment

Dont paste link here..